Sure Heat Manifold Replacement - Manual

Tuscany 30” Grill Maintenance Manual
Replace the Manifold:
1. Remove the main cooking grates and flavor
grids.
2. Using a 1/4” socket remove the (3) screws
holding the rear heat shield and burners in place.
3. Disconnect the wires from the main burner
igniter.
NOTE: Make sure the wire does not fall into the access
hole.
4. Angle the main burner up, and set it in the
firebox.
5. Remove the (3) screws holding the Front
Bottom IR Igniter Mounting Bracket to the burner
and Front Heat Shield. Then remove the bracket.
6. Remover the (6) screws holding the Front
Heat Shield in position. Then lift the Front Heat
Shield out of the firebox.
7. Hold the elbow on the rear IR burner valve
and use a 3/4 wrench to disconnect the flex line
from it.
Note: Be careful, applying pressure to the elbow of the
valve may cause it to break.
Rear IR
Burner Valve
Flex Line
Elbow