Presetting dab services automatically, Presetting dab services manually, Preset edit – Sony MDX-M690 RU User Manual

Page 23: 23 presetting dab services automatically

Advertising
background image

23

Presetting DAB services
automatically

— BTM

The BTM (Best Tuning Memory) function picks
out DAB ensembles and automatically assigns
the services within the ensembles to preset
service numbers. The unit can preset up to 40
services.
If services have been previously set, the BTM
function operates under the following conditions:
• If you activate the BTM function while

listening to a preset service, the unit will store
detected services (by overwriting) only to
preset numbers higher than that of the current
present service.

• If you activate the function while listening to a

service that is not preset, the unit will replace
the contents of all preset numbers.

• In both cases above, if the unit detects a service

that is identical to one already preset, the
previously stored service remains unchanged
and the newly detected service is not preset.

1

While listening to a DAB programme,
press

(MENU)

.

2

Press

M

or

m

repeatedly until “BTM”

appears.

3

Press

(ENTER)

.

A beep sounds when the service is stored.
After activating the BTM function, the unit
tunes the service assigned in the last smallest
preset memory No. automatically.

Note
If the unit can only tune in a few services, the BTM
function may not assign services to all the preset
service numbers.

Presetting DAB services
manually

— Preset Edit

You can also preset DAB services manually or
delete a service which is already preset. Note that
up to 40 services (preset either by the BTM
function or manually) can be preset to the unit’s
memory.

1

While listening to a DAB programme,
press

(MENU)

.

2

Press

M

or

m

repeatedly until “PRS

Edit” appears, then press

(ENTER)

.

3

Select the service and the preset
number you want to preset.

1

Press either side of

(SEEK)

to select

the service.

2

Press

M

or

m

to select the preset

number.

3

Press

(ENTER)

.

The Preset Edit commands will appear in
the display.

4

Press

M

or

m

to select the desired

command.

5

Press

(ENTER)

.

To edit other services, repeat steps 3 and 4.

continue to next page

t

Advertising
This manual is related to the following products: