The Shrunks Stepaire Bandit Nap Pad User Manual

Pumps, Inflation, Warning

Advertising
background image

PUMPS

Set up and supervision must be done by
a competent adult. The Stepaire Nap Pad
comes equipped with a built-in foot pump. It
is located directly beneath the Stepaire logo
at the bottom end of the Nap Pad.

INFLATION

More information on proper inflation is available on our website. Please view the
short how-to videos at www.theshrunks.com

Please note: Keep in mind the temperature of the air going into the product and the outside
air. If your inflator is hot and sending warm air into the product, when it cools, it will seem
like your product is losing air. This is normal. The product should be firm when completely
inflated, but allow a small depression when pushed on with your hand while in use. This is a
good evaluation of proper inflation. Proper inflation should be checked often if the product is
left inflated for consecutive days.

DO NOT allow children to play on the product until it is fully inflated! The inflatable mattress
found inside the Stepaire Nap Pad can be filled with varying amounts of air. Inflate with
more air for fuller, firmer support. Inflate with less air for softer support.

DO NOT OVER INFLATE! Product should be firm, but allow a small depression when pushed
on with your hand. DO NOT drag across concrete, pavement or other rough surfaces. Unfold
inflatable flat on a clean surface free of debris and sharp objects.

Be aware of your temperatures! Weather will affect the air volume /pressure in your unit.
Variations of temperatures can make Inflatable seem to lose or gain air. This is normal.

Hot weather causes air to expand and the PVC might feel soft to the touch. If air is expand-
ing and it feels like the unit is hard and does not allow a small depression when pushed on
with your hand, you will need to release some air to avoid over-inflation. If the air is warm
and PVC feels soft to the touch, do not add air. This will stretch the material and cause
seam problems and over-inflation.

Cold weather causes air to compress. When the sun is shining and the temperature rises,
the air will again expand in the unit. If you are experiencing a cool span you may want to
add additional air. Be careful when the temperature rises that the unit does not become
over-inflated. Damage due to over-inflation voids the warranty. All inflatables are sensitive to
cold, therefore never unfold or inflate in temperatures below 50 degrees.

WARNING

Read these materials prior to assembling and using your Nap Pad, failure to
follow these instructions could result in serious injury or death.

- Set up and supervision must be done by a competent adult!
- The Nap Pad is not a life saving device!
- Ensure proper set up prior to use!
- Instruct children on proper use of this product!
- Over inflation is the major cause of leaks.
- Do not inflate with an air compressor or other high pressure pump.
- This item is designed to be inflated with a high volume of air but at a low pressure.
- Read the instructions and warnings printed in this manual for proper inflation and safe use.
- Keep away from fire and other heat sources. Keep out of direct sunlight when
not in use.
- This unit is intended for domestic family use only and not for use in public areas or
as a rental.
- The Nap Pad should only be inflated with the built-in Stepaire Pump.

SPECIFICATIONS

Stepaire™ Bandit Nap Pad
Orange - Manufacturer Item No. 88086
Red - Manufacturer Item No. 88085
Pink - Manufacturer Item No. 88087
Blue - Manufacturer Item No. 88088

Parts included
1 - Nap Pad (with blanket attached)
1 - Inflatable Mattress with built-in pump
1 - Carrying Bag

Recommended Age: 2+
Recommended Maximum Weight: 150lbs / 68kg
Recommended maximum number of persons: 1 child per nap pad

Stepaire

Bandit Nap Pad

Instructions & Warnings

EN

Advertising