Toa ST-800 - Manual

ST-800
1 2
3
1 2
3
Input
Shield Hot
Cold
Output
Shield Hot
Cold
Body earth
Weight: 715 g (1.58 lb)
Finish (Main body): Die-cast zinc, black, paint, mat
1
1
5 (4.53)
40 (1.57)
124 (4.88)
To remove the microphone,
press this locking button.
Input connector
(XLR-3-31 or equivalent)
Unit: mm (in)
Output connector
(XLR-3-32 or equivalent)
MICROPHONE STAND
INSTRUCTION MANUAL
Thank you for purchasing TOA's Microphone Stand.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
CAUTION
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
1. SAFETY PRECAUTIONS
• Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down and causing personal injury and/or property
damage.
• Do not lay the connection cable where it can be
walked on or tripped over, causing personal injury.
2. GENERAL DESCRIPTION
The ST-800 is a desk-top microphone stand base
designed for use with a gooseneck condenser microphone.
It features compact and stable design.
3. HANDLING PRECAUTIONS
To clean, be sure to first disconnect the connection cable,
then wipe with a dry cloth. When the unit gets very dirty,
use a cloth damped in a neutral cleanser. Never use
benzene, thinner, alcohol, or chemically-treated cleaning
cloth because such volatile liquids could deform or discolor
the unit.
4. CIRCUIT DIAGRAM
133-05-460-20
URL: http://www.toa.jp/
5. APPEARANSE
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo, Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany