Cisco Cisco Unified 7940G - Manual (Page 4)

© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 4 of 7
handset, headset, and ringer. The handset is Hearing Aid Compatible (HAC) and meets FCC loudness requirements for Americans with Disabilities
Act (ADA). Section 508 loudness requirements can be achieved using industry standard inline handset amplifiers such as Walker Equipment W-10
or CE-100 amplifiers.
The dial pad is also ADA compliant.
The footstand of the Cisco 7940G is adjustable from flat to 60 degrees to provide optimum display viewing and comfortable use of all buttons and
keys. The footstand is keyed to match standard wall jack configurations for wall mounting. Two optional wall mount brackets are also offered as
noted below.
The Cisco IP Phone 7940G can also receive power down the LAN from any of the Cisco inline power-capable blades and boxes.
For added security, the audible dual-tone multifrequency (DTMF) tones are masked when the speakerphone mode is used.
Other Cisco IP Phone 7940G features include:
•
24+ user-adjustable ring tones
•
A hearing-aid-compatible handset (meets American Disabilities Act [ADA] requirements) and HAC compliance for magnetic coupling to
approved HAC hearing aids
•
G.711 and G.729a audio compression
•
H.323 compatible and Microsoft NetMeeting compatibility
•
An IP address assignment—DHCP client or statically configured
•
Comfort noise generation and voice activity detection (VAD) programming on a system basis
The phone also includes the following settings:
•
Display contrast
•
Ring type
•
Network configuration
•
Call status
SPECIFICATIONS
•
Download firmware changes from Cisco CallManager and CCO
•
Dimensions: 8 x 10.5 x 6 in. (20.32 x 26.67 x 15.24 cm) (H x W x D)
•
Phone weight: 3.5 lb (1.6 kg)
•
Polycarbonate acrylonitrile butadiene styerene (PABS) plastic in textured dark gray color with silver bezel
•
48 VDC required, supplied locally at the desktop using an optional AC to DC power supply (CP-PWR-CUBE-2=)
Also requires ordering one of the AC country cords below.
AC Country Power Cords
CP-PWR-CORD-AP= (Asia Pacific)
CP-PWR-CORD-AR= (Argentina)
CP-PWR-CORD-AU= (Australia)
CP-PWR-CORD-CE= (Central Europe)
CP-PWR-CORD-JP= (Japan)