Traxxas 6509 TQi 2.4GHz - Manual (Page 6)

6 • TQ i RADIO SYSTEM
Models: All 1/16th Scale Models; E-Revo BE; E-Revo; Revo;
Revo 3.3; Raptor; Slash 4X4 Series; Slash Series; Slash VXL;
Slayer; Stampede 4x4 VXL; Summit; T-Maxx 3.3
Profile 1
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn
Transmitter
ON
Release MENU and
SET red LED blinks
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Models: Bandit; Bandit VXL; Blast; E-Maxx BE; E-Maxx;
Rustler; Rustler VXL; Spartan; Stampede; Stampede VXL;
Nitro Stampede; Nitro Sport; Villain EX; XO-1
Profile 2
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn
Transmitter
ON
Release MENU and
SET red LED blinks
x 2
Press MENU
red LED blinks (x2)
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Models: Jato; Jato 3.3
Profile 3
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn
Transmitter
ON
Release MENU and
SET red LED blinks
x 3
Press MENU twice
red LED blinks (x3)
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Models: Nitro 4-Tec 3.3; Nitro Rustler; Blast
Profile 4
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn
Transmitter
ON
Release MENU and
SET red LED blinks
x 4
Press MENU three times
red LED blinks (x4)
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Models: T-Maxx 3.3; T-Maxx Classic; S-Maxx
Profile 5
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn
Transmitter
ON
Release MENU and
SET red LED blinks
x 5
Press MENU four times
red LED blinks (x5)
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Selecting Your Model Profile (Resetting to Defaults)
The TQi radio system has been programmed with servo reversing profiles for use with current Traxxas models. Find your model on this chart and
follow the steps to set the default transmitter settings for your model. The settings for servo direction will be set, but you may need to adjust the
trim and endpoint settings for the steering and throttle channels. Should you ever need restore your transmitter to the default settings for your
model, use the steps described in this chart.
Using the Traxxas TQi Radio System
with non-Traxxas Models
GETTING STARTED
The TQi radio system can be used with all popular servos in any
hobby-grade R/C vehicle. From the factory, the transmitter is set
for Profile 1, with each channel set as “reversed.” The chart to the
right indicates the direction the servos will operate. Follow the
instructions on page 14 if you need to change these setting(s) to
suit your model.
*Models 6507 & 6508 only
Channel 1
Steering
Channel 3*
Rocker Switch
Channel 2
Throttle/Brake
Channel 4/5*
3-Position Switch
Ch. 4 Ch. 5