Clarion PSWFRGR - Manual (Page 4)

4
V. ATTACH THE ENCLOSURE TO VEHICLE
A. Press enclosure firmly against the rear wall.
B. Screw in brackets to the vehicle floor using the (4) supplied 1"
self tapping screws.
VI. REASSEMBLE THE VEHICLE
A. Make sure all the wires are hidden. Then do the process in
reverse order.
Clarion Corporation of America
661 West Redondo Beach Blvd Gardena, CA 90247
800-Go-Clarion
www.clarion-usa.com © 2000 Clarion Corporation, Gardena, CA
10 - PSWFRGR Rev. 1 (05/00 )