Trending Accessibility Semi-Permanent Removable Threshold - Manual

Semi-Permanent Removable Threshold
Installation Instructions
PRODUCT MATERIAL AND STRUCTURE –
Non-porous ABS cap mounted to a super strong
PVC substrate that will match both gelcoat and
acrylic bathware.
Thank you for purchasing the Praxis Semi-Permanent
Removable Threshold. For best results, please read
and follow all directions carefully.
CUSTOMIZING THE
SEMI-PERMANENT THRESHOLD
Step 1- Place the semi-permanent threshold into
shower to test fi t. Although the semi-permanent
threshold is pre-cut at the manufacturer, modifi cations
may be necessary for a custom fi t. (FIG.A)
STEP 2- Mark area that
needs adjustment with
a pencil. (FIG. B) A
small piece of cardboard
can be used to trace
the radius of the area
and can then be used
as a template or guide
to modify the corners
of the semi-permanent
threshold to ensure a
good fi t. (FIGS. C-D)
Grinding or sanding
the corners will assure
a custom fi t and
installation. (FIG. E)
STEP3- After
making the necessary
modifi cations, place
the threshold back
into the shower to
ensure all modifi cations
are correct and dry
fi tting the threshold is
accurate.
STEP 4- You are
now ready to install
the threshold into the
shower.
Semi-Permanent Removable Threshold
Installation Instructions
Tools you might need for proper installation
• Pencil
• Grinder or Sander
• Mildew Resistant Bonding Silicone (white)
• Caulk Gun and White Caulk
• Tape Measure
• Two (2) 5”x 5” Cardboard Samples
• Removable Masking Tape
Available only in white
FIG.A
FIG.B
FIG.C
FIG.D