Contec 4(FIT)GY 1 - Manual

Ver.1.00
DIO-4/4(FIT)GY 1
F&eIT Series
Isolated Digital I/O Module
DIO-4/4(FIT)GY
*
Specifications, color and design of the products are subject to
change without notice.
This product is an expansion module (device module) that adds
digital signal I/O interfaces to one of various types of controllers.
The product is used in combination with the I/O controller
module <CPU-CAxx(FIT)GY> (*1) or microcontroller unit
<CPU-SBxx(FIT)GY> (*1) in the F&eIT Series.
This product can perform a maximum of 4 points of
Optocoupler isolated input and 4 points of Optocoupler isolated
output per module. (Input: 12 - 24 VDC specified, output: 12 -
48 VDC specified)
*1 This module is available in different product models. "x" in each model number
represents a blank or one alphanumeric character. This is applicable to the rest of this
document.
This product can perform 4-point digital signal input and 4-point
digital signal output, treating 4 points as a group.
Input section is ready to accept both the current sinking output
and current source output.
The output section is a high sink current, open collector type
using high-capacitance transistors.
150 mA/24 VDC or 50 mA/48 VDC max. (per channel)
Isolated I/O operations using an optocoupler improves noise
immunity.
A rotary switch allows you to set device IDs, making it easy to
keep track of device numbers.
Like other F&eIT series products, the module has a 35mm DIN
rail mounting mechanism as standard. A connection to a
controller module can be effected on a lateral, stack basis in a
unique configuration, which permits a simple, smart system
configuration without the need for a backplane board.
Module[DIO-4/4(FIT)GY] …1
First step guide … 1
CD-ROM [F&eIT Series Setup Disk] *1…1
Interface connector plug…1
*1 The CD-ROM contains various software and User’s Guide.
Specifications
Specifications
Item
DIO-4/4(FIT)GY
Input section
Input format Optocoupler isolated input
(compatible with current sink output and current source
output)
Input resistance 3k Ω
Input ON current 3.4mA or more
Input OFF current 0.16mA or less
Number of input signal points 4 points (4 points/common)
Response time
Within 1msec
External circuit power supply 12 - 24VDC (±15%)
(4mA/12V - 8mA/24V per channel)
Output section
Output format Optocoupler isolated open collector output (current sink type)
Output voltage 12 - 48VDC (±15%) Ratings
Output current 150mA (12 - 24V) (per channel) (Max.)
50mA (36 - 48V) (per channel) (Max.)
Number of output signal
points 4 points (4 points/common)
Response time Within 1msec
External circuit power supply 12 - 48VDC (±15%)
Common section
Interrupt level Using CPU-SBxx(FIT)GY: IRQ 5, 7, or 9
Internal current consumption 5VDC(±5%) 150mA(Max.) *1
Allowable distance of signal
extension Approx. 50m (depending on wiring environment)
Physical dimensions (mm) 25.2(W) x 64.7(D) x 94.0(H) (exclusive of protrusions)
Weight of the module itself 100g
Module connection method Stack connection by means of a connection mechanism
standard with the system.
Module installation method One-touch connection to 35mm DIN rails
(standard connection mechanism provided in the system)
Applicable wire AWG 28 - 16 wire type: 0.32 - 1.30mm
Applicable plug FRONT-MC 1,5/12-STF-3,81 (made by Phoenix Contact
Corp.)
3.81mm-pitch, rated current: 8A (Max.)
*1 The stack connector accepts currents of up to 3.0A (Max.).
Installation Environment Requirements
Item Requirement description
Operating temperature 0 - 50 °C
Storage temperature -10 - 60 °C
Operating humidity 10 - 90%RH (No condensation)
Floating dust particles Not to be excessive
Corrosive gases None
Line-noise
*1 AC line/2kV, Signal line/1kV
(IEC1000-4-4Level 3, EN61000-4-4Level 3) Noise immunity
Static
electricity
resistance Contact discharge/4kV (IEC1000-4-2Level 2,
EN61000-4-2Level 2)
Atmospheric discharge/8kV (IEC1000-4-2Level 3,
EN61000-4-2Level 3)
Vibration
resistance Sweep
resistance 10 - 57Hz/semi-amplitude 0.15mm, 57 - 150Hz/2.0G
80minutes each in X, Y, and Z directions
(JIS C0040-compliant, IEC68-2-6-compliant)
Impact resistance 15G half-sine shock for 11ms in X, Y, and Z directions
(JIS C0041-compliant, IEC68-2-27-compliant)
*1 When using a POW-AD22GY
Specification Features
Packing List