Accessories – VACUUBRAND CVC 3000 User Manual
Page 69
* If remote operation is selected or deselected, the user has to ensure
that no dangerous status of the system can occur due to the change of
the mode of operation, and must also take appropriate safety precau-
tions, especially if selecting remote operation interferes with a locally
operated active process.
** With command ”ECHO 1” a return value can be activated at write com-
mands. A return value is only given if the command is performed cor-
rectly.
*** After being switched on, the controller is in ”CVC 2” mode by default.
Send ”CVC 3” and ”STORE” to permanently set the controller RS 232C
commands to the extended set ”CVC 3000”.
Accessories
External pressure transducer VSK 3000, ..................................................636657
capacitive, ceramic diaphragm sensor 810 - 0.1 Torr (1080 - 0.1 mbar)
External pressure transducer VSP 3000, Pirani* ......................................636163
7.5*10
2
- 1*10
-3
Torr (1*10
3
- 1*10
-3
mbar)
In-line valve VV-B 6, VACUU•BUS ..............................................................674290
In-line valve VV-B 6C, VACUU•BUS ............................................................674291
In-line valve VV-B 15C, KF 16, VACUU•BUS .............................................674210
In-line valve VV-B 15C, KF 25, VACUU•BUS ..............................................674215
Coolant valve VKW-B, VACUU•BUS ...........................................................674220
Venting valve VBM-B / KF 16, VACUU•BUS .............................................. 674217
VACUU•BUS Y-type adapter ......................................................................636656
VACUU•BUS extension cable, 6.6ft (2m) ....................................................612552
VACUU•BUS wall jack .................................................................................636153
Command
Operation
Parameter Description
OUT_SENSOR
1
2...9
internal sensor
external sensors (if connected)
* ”Auto mode” and ”VACUULAN” functions are not available when using
a gauge head VSP 3000. Maximum control range with two-point con-
trol: 1*10
3
Torr - 7.5*10
-2
Torr (1*10
3
mbar - 1*10
-3
mbar)