Setting up and installing the equipment, Notice – VACUUBRAND CVC 3000 detect User Manual

Page 14

Advertising
background image

page 14 of 74

troller in a cabinet or a housing. Make sure ventilation

is adequate to maintain recommended operating tem-

perature. Install an external automatic ventilation sys-

tem if necessary. If processing hot gases, make sure

that the maximum permitted gas temperature at the

pressure transducer is not exceeded (see “Technical

data”, pg. 21).

Use the equipment

only as intended, that is, for mea-

surement and control of vacuum in vessels designed for

that purpose. Any other use will automatically invalidate

all warranty and liability claims.

Remain aware of safety and risks.

Setting up and installing the equipment

+

Do not permit any

uncontrolled pressurizing (e.g.,

make sure that pipelines cannot become blocked) to

avoid a

risk of bursting!

+

Keep the VACUU•BUS cables away from heated sur-

faces.

• Comply with

maximum permissible pressures at the

pressure transducer. See section. “Technical data”, pg.

21.

• Connect hoses gas tight at the vacuum connection and

at the connection to the vacuum pump.

• Secure hoses at hose nozzles (e.g., with hose clamp)

to prevent their accidental slipping.

• Check the power source and the equipment’s rating plate

to be sure that the power source and the equipment

match in voltage, phase, and frequency.

• When working with residues, aggressive or condens-

able media, install a gas washing bottle if necessary.

NOTICE

Advertising