Ambient conditions, Notice – VACUUBRAND CVC 3000 detect User Manual

Page 15

Advertising
background image

page 15 of 74

Assemble and lock the suitable power plug (included in

shipment) to the power supply prior to use.

The controller is equipped with a short-circuit-proof, wide-

range power supply with an integrated overload protec-

tion.

Position the controller and its vacuum line in such a way

that condensate cannot flow towards the pressure trans-

ducer.

In case connect inert gas at the venting connection.

Allow the equipment to equilibrate to ambient temperature

if you bring it from cold environment into a room prior to

operation. Notice if there is water condensation on cold

surfaces.

Comply with all

applicable and relevant safety require-

ments (regulations and guidelines). Implement the re-

quired actions and adopt suitable safety measures.

Ambient conditions

Do not reach for this product if it has fallen into liquid.

There is a risk of deadly electrical shock. Unplug the

system immediately.

+

Do not use this product in an area where it can fall or

be pulled into water or other liquids.

• Adopt suitable measures in case of differences from

recommended conditions, e.g., using the equipment

outdoors, conductive pollution or external condensa-

tion.

• Do not operate this product near flames.

To the best of our knowledge the equipment is in com-

pliance with the requirements of the applicable EC-direc-

tives and harmonized standards (see ”Declaration of Con-

formity”) with regard to design, type and model. Directive

NOTICE

NOTICE

Advertising