Rps led – Cisco 3560 User Manual

Page 22

Advertising
background image

1-12

Catalyst 3560 Switch Hardware Installation Guide

OL-6337-07

Chapter 1 Product Overview

Front Panel Description

RPS LED

Note

The Catalyst 3560-8PC and Catalyst 3560-12PC-S switches do not have an RPS LED.

For more information about the Cisco RPS 2300 and the RPS 675, see the Cisco Redundant Power
System 2300 Hardware Installation Guide
and the Cisco RPS 675 Redundant Power System Hardware
Installation Guide
.

Table 1-3

RPS LED

Color

RPS Status

Off

RPS is off or not properly connected.

Green

RPS is connected and ready to provide back-up power, if required.

Blinking green

RPS is connected but is unavailable because it is providing power to another device
(redundancy has been allocated to a neighboring device).

Amber

The RPS is in standby mode or in a fault condition. Press the Standby/Active button
on the RPS, and the LED should turn green. If it does not, the RPS fan might have
failed. Contact Cisco.

Blinking amber

The internal power supply in a switch has failed, and the RPS is providing power
to the switch (redundancy has been allocated to this device).

Advertising