Inserting and removing the sfp module patch cable, Step 5, Step 6 – Cisco 3560 User Manual
Page 50: Step 1, Step 2, Step 3, Series
2-18
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 2 Switch Installation (24- and 48-Port Switches)
Inserting and Removing the SFP Module Patch Cable
Step 5
For fiber-optic SFP modules, insert a dust plug into the optical ports of the SFP module to keep the
optical interfaces clean.
Step 6
Place the removed SFP module in an antistatic bag or other protective environment.
Inserting and Removing the SFP Module Patch Cable
Step 1
Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.
Step 2
Insert the SFP module patch cable into the slot until you feel the connector on the cable snap into place
in the rear of the slot (see
Figure 2-16
Inserting an SFP Module Patch Cable into an SFP Module Slot
Step 3
Repeat these steps for the second Catalyst 3560 switch to which you want to cascade the first switch.
See
.
Figure 2-17
Connecting Two Catalyst 3560 Switches with an SFP Module Patch Cable
To remove an SFP module patch cable from the SFP module slot, release the connector, and pull it from
the SFP module slot.
126810
Catalyst 3560
SERIES
14
15
16
17
18
19
20
21
22
23
24
13
13X
14X
23X
24X
1
2
Catalyst 3560
SERIES
MODE
1
2
3
4
5
6
7
8
9
10
11
12
14
15
16
17
18
19
20
21
22
23
24
13
1X
2X
11X
12X
13X
14X
23X
24X
RPS
STAT
DUPLX
SPEED
SYST
1
2
126811
Catalyst 3560
SERIES
MODE
1
2
3
4
5
6
7
8
9
10
11
12
14
15
16
17
18
19
20
21
22
23
24
13
1X
2X
11X
12X
13X
14X
23X
24X
RPS
STAT
DUPLX
SPEED
SYST
1
2