Wampler Pedals Cranked OD - 2014 Limited Edition Overdrive User Manual

Cranked od

Advertising
background image

TM

TM

Cranked OD - 2014 Limited Edition Overdrive

Cranked

OD

Every since Wampler Pedals discontinued the original version

“Cranked AC” we have been having tons and tons of customer

requests for a re-release of that pedal. While the original sounded

pretty good – Brian knew that he could make it sound great! So after

some tinkering on the breadboard, we are proud to announce the

CRANKED. A pedal truly worthy of its name!

The Cranked picks up where the Thirty Something leaves off. This

pedal is a tribute to those famous British amps that are running wide

open. Whether at bedroom volume or full on stage rock stardom –

you can achieve truly cranked up tones at any time.

After revisiting the original unit, there just had to be some updates.

Starting with an active 3 band EQ. Now you can dial in or take out as

much of each frequency as you want; totally tonal control!

The Cranked is strictly limited edition overdrive – this is your chance

to own a piece of history, with a twist.

Input and Output: The input jack is located on the top right of the pedal, above the treble control and the

output is the other side of the power input, above the bass control.

True By-pass Relay Switch: We use a true-bypass relay because it utilizes a quieter and smoother switch

that is more reliable than traditional bypass switches. Your original tone/signal will remain unaffected

when the pedal is not engaged.

Volume: This control adjusts the output level of the Cranked. The Cranked was designed to have higher

output. This allows the Cranked to have more headroom when needed. The output volume, Gain and

Tone controls all have an impact on the total volume, so you might want to adjust the Volume after you

have dialed in the other controls. Re-adjustment might be necessary if you get it to the desired level and

still need to tweak the sound.

Advertising
Table of contents