YSI MultiLab 4010-2 User Manual
YSI Equipment
Advertising
Table of contents
Document Outline
- 1 Overview
- 2 Safety
- 3 Commissioning
- 4 Operation
- 5 pH value
- 5.1 Measuring
- 5.2 pH calibration
- 5.2.1 Why calibrate?
- 5.2.2 When do you have to calibrate?
- 5.2.3 Carrying out automatic calibration (AutoCal)
- 5.2.4 Carrying out a manual calibration (ConCal)
- 5.2.5 Calibration points
- 5.2.6 Calibration data
- 5.2.7 Continuous measurement control (CMC function)
- 5.2.8 QSC function (sensor quality control)
- 6 ORP voltage
- 7 Ion concentration
- 8 Dissolved oxygen (D.O.)
- 9 Conductivity
- 10 Settings
- 11 Data storage
- 12 Transmitting data
- 12.1 Outputting current measurement data
- 12.2 Transmitting data
- 12.3 Connecting the PC / USB-B interface (USB Device)
- 12.4 Connecting a USB memory device/USB printer (USB-A interface (USB Host))
- 12.5 Options for data transmission to the USB-B (PC) interface and the USB-A (USB printer) interface
- 12.6 Data transmission to the USB-A interface (USB memory device)
- 12.7 MultiLab Importer
- 12.8 BOD Analyst Pro
- 13 Maintenance, cleaning, disposal
- 14 What to do if...
- 15 Technical data
- 16 Firmware update
- 17 Glossary
- 18 Index
- 19 Appendix
- 20 Contact Information