H-B Instrument 701 User Manual

H-B Instrument Measuring instruments

Advertising
background image

Form 0-812 Rev. 0

ENGLISH

ULTIMATE Full Feature Wireless Weather Station – European Version

FEATURES:

• Animation weather forecast: Sunny, Partly Sunny, Cloudy, Rainy

• Day of week in 7 languages: English, German, French, Italian, Spanish, Dutch and Danish

• Outdoor temperature and humidity with RF sensor – links up to 3 – 1 sensor included

• Barometric pressure via animation forecast, bar chart, 12 hour history, and readout in mb/hpa or inHg

• In/out temperature and humidity trend indicator

• Max/min thermometer and hygrometer memory

• Temperature alert

• Comfort index indicator

• Alarm/snooze function

• 12/24 hour selectable clock

• Calendar with day of week

• Moon phase indicator

• Sunrise/sunset times based on your location

• Tide indicator

• Low battery indicator

SPECIFICATIONS:
Temperature range main unit

0 to 50°C (32 to 122°F)

Temperature range remote sensor -50 to 70°C (-58 to 158°F)
Temperature resolution

0.1°

Humidity range

20 to 99% RH

Humidity resolution

1% RH

Sampling time

10 seconds

RF transmission frequency

433 MHz

Battery

2 AA batteries for main unit; 2 AA batteries for remote sensor (included)

Battery Installation
This device is designed for easy set up. The following steps are required in the proper sequence. Please insert
batteries for the main unit before the remote sensor

1. Press and slide to open the battery cover at the back of the unit. Insert 2 AA batteries according to the polarity

marks inside the battery compartment

2. Close the battery cover
3. Once you have properly installed the batteries, the LCD display will show the full display for 3 seconds and enter

the normal mode after the beep. The time will default to 0:00 and calendar to January 1. The alarm will default
to PM 12:00 disabled, the weather icon will default to partly sunny. The temperature scale will default to °C. The
time system will default to 24 hours.

Wireless Remote Sensor Registration Procedure

1. Lift off the bracket stand of the remote sensor by sliding the bracket

2. Use a screwdriver to remove the screws on the battery cover

3. Insert 2 AA batteries according to the polarity markings on the battery compartment

4. Once the batteries are inserted, the sensor will start transmitting temperature and humidity readings for 3

minutes

5. The main unit will display remote channel 1 and the temperature reading

6. While in the normal display mode, holding down the “CHANNEL” button for 2 seconds will clear the channel

information

7. After registration is completed for sensor 1, put the rubber seal into the cover groove, close the battery cover,

tighten the screws, and flip out the bracket stand. Follow the same procedure if installing additional remote

sensors.

NOTE:

After you have placed the sensor in the remote location, observe the main unit channel display for that sensor after

35 minutes. If the (--) dash icon is flashing for channel one, the signal has been lost, try rotating the sensor in 45°

steps, wait for at least 3 minutes after each position change. Observe the main unit channel display on each position

to determine that the remote temperature display has been restored, if not, move the remote sensor closer to the

main unit or reposition both the main unit and the remote sensor until reception is observed.

Setting the Time, Calendar and 12/24 hour format

1. Press & Hold “TIME SET” button for 3 seconds until you hear a beep – to enter into time setting

2. The sequence of time setting is: Year (2000-2099)MonthDateLanguageHourMinuteExit

3. Press “UP” button one time to advance the setting one step; hold “UP” button for 2 seconds and it will advance

the setting by 8 steps/second

Advertising