Streaming statistics – Cisco OL-12232-01 User Manual

Page 15

Advertising
background image

8-15

Cisco Unified IP Phone 7970G/7971G-GE for Cisco Unified Communications Manager 6.0

OL-12232-01

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely

Streaming Statistics

Streaming Statistics

A Cisco Unified IP Phone can stream information to and from up to three devices
simultaneously. A phone streams information when it is on a a call or running a
service that sends or receives audio or data.

The streaming statistics areas on a phone’s web page provide information about
the streams. Most calls use only one stream (Stream 1), but some calls use two or
three stream. For example, a barged call uses Stream 1 and Stream 2.

To display a Streaming Statistics area, access the web page for the phone as
described in the

“Accessing the Web Page for a Phone” section on page 8-2

, and

then click the Stream 1, the Stream 2, or the Stream 3 hyperlink.

Table 8-5

describes the items in the Streaming Statistics areas.

Table 8-5

Streaming Statistics Area Items

Item

Description

Remote Address

IP address and UDP port of the destination of the
stream.

Local Address

IP address and UPD port of the phone.

Start Time

Internal time stamp indicating when
Cisco Unified Communications Manager requested
that the phone start transmitting packets.

Stream Status

Indication of whether streaming is active or not.

Host Name

Unique, fixed name that is automatically assigned to
the phone based on its MAC address.

Sender Packets

Total number of RTP data packets transmitted by the
phone since starting this connection. The value is 0 if
the connection is set to receive only mode.

Sender Octets

Total number of payload octets transmitted in RTP data
packets by the phone since starting this connection.
The value is 0 if the connection is set to receive only
mode.

Sender Codec

Type of audio encoding used for the transmitted
stream.

Advertising