Print server management using ftp, Editing the config file, Ftp help – Canon AXIS 1650 User Manual

Page 52

Advertising
background image

Print Server Management and Configuration

52

AXIS 1650 User’s Manual

Print Server Management Using FTP

Having assigned an IP address to your AXIS 1650, as described in “Set

the IP Address” on page 11, you can change the AXIS 1650 parameter

settings using the File Transport Protocol (FTP).

Editing the config file

Follow the instructions below to edit the config file using FTP:

1. Log in to the AXIS 1650 by typing:

ftp <IP address>

or

ftp <host name>

in a Command prompt.

2. Enter the user id (the default entry is

root

; if the default password has been

changed then it must also be entered).

3. Download the

config file to your host by typing:

get config

4. Edit the file using your preferred text editor.

5. Save the

config file to the AXIS 1650 by typing:

put config CONFIG

Example

How to get and put the config file using FTP from a Command prompt.

FTP Help

By typing

help

in step 3 in the FTP instructions described above, a list of

available commands will be displayed.

It is important that the destination file is specified in capital letters.
Otherwise the edits are temporary and will be lost once the AXIS 1650 has
been rebooted.

> ftp npserver

connected to npserver.

220 AXIS 1650 FTP Print Server v1. June 1 2005 ready.

Name (npserver:thomas): root

Advertising