Clarion XAZ611 - Manual (Page 16)

20
XAZ611
English
MD Changer Operations
MD changer functions
When an optional MD changer is connected
through the CeNET cable, this unit controls all
the MD changer functions. This unit can control
a total of 2 changers (MD and/or CD).
Press FNC button 3 and select the MD changer
mode to start play. If 2 MD changers are con-
nected, press FNC button
3 to select the MD
changer for play.
∗
If “NO DISC” appears in the display, load MDs into
the MD changer.
Pausing play
1. Press Play/pause button # to pause play.
“PAUSE” appears in the display.
2. To resume play, press Play/pause button #
again.
Switching disc titles and track titles
This unit can display disc titles and track titles
already entered on MDs. Titles up to 128 char-
acters long can be displayed by scrolling the titles.
∗
Titles cannot be entered for MDs with this unit.
1. Press DISP button 0 to display the title. The
disc title or track title is displayed.
2. Each time you press and hold DISP button
0 for 1 second or longer, the display toggles
between the disc title and the track title.
● Scrolling titles
When a title is longer than 11 characters, you
can scroll through it with the following operation.
1. Display the MD title (disc or track).
2. Press TITLE button 2 .
The display scrolls through the title.
Selecting an MD
Each of the Direct button 8 corresponds to an
MD loaded into the MD changer. Press the cor-
responding Direct button
8 (1 to 6) to select the
desired disc.
∗
If an MD is not loaded in a slot of the MD changer,
pressing the Direct button 8 corresponding to its
disc number is invalid.
Selecting a track
● Track-up
1. Press the right side of SEARCH button % to
move ahead to the beginning of the next track.
2. Each time you press the right side of SEARCH
button % , the track advances ahead to the
beginning of the next track.
● Track-down
1. Press the left side of SEARCH button % to
move back to the beginning of the current track.
2. Press the left side of SEARCH button % twice
to move to the beginning of the previous track.
Fast-forward/fast-backward
● Fast-forward
Press and hold the right side of SEARCH button
% for 1 second or longer.
● Fast-backward
Press and hold the left side of SEARCH button
% for 1 second or longer.
Top function
The top function plays from the first track (track
No. 1) of the disc. Press the Direct button
8 (1
to 6) with the same number as the MD playing.
∗
If an MD is not loaded in a slot of the MD changer,
pressing the Direct button 8 corresponding to its
disc number is invalid.
Scan play
The scan play locates and plays the first 10 sec-
onds of each track on a disc automatically. This
function continues on the disc until it is canceled.
∗
The scan play is useful when you want to select a
desired track.
1. Press SCN button 4 to start track scanning.
“SCN” lights in the display.
2. To cancel the scan play, press SCN button 4
again. “SCN” goes off from the display and
the current track continues to play.
Disc scan play
The disc scan play locates and plays the first 10
seconds of the first track on each disc in the cur-
rently selected MD changer. This function con-
tinues automatically until it is canceled.
∗
The disc scan play is useful when you want to se-
lect a desired MD.
1. Press and hold SCN button 4 for 1 second
or longer. “DISC” and “SCN” light in the dis-
play and the disc scan play starts.
2. To cancel the disc scan play, press and hold
SCN button 4 again. “DISC” and “SCN” go
off from the display and the current track con-
tinues to play.