Clarion XAZ611 - Manual (Page 23)

XAZ611
27
English
Seek tuning
1. Press FNC button 3 to select DAB mode.
2. Press and hold right or left for 1 second or
longer using SEARCH button % .
∗
“SEEK” appears in the display.
3. “DAB” lights up in the display when the main
unit receives a DAB station.
∗
The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1. Press FNC button 3 to select DAB mode.
2. Press and hold BND button ! for 1 second or
longer. “MANU” lights up in the display.
3. Press the right or left SEARCH button % to
select a station.
∗
If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
Switching programmes
1. Press FNC button 3 to receive a DAB sta-
tion.
2. Press the right or left SEARCH button % to
switch programmes in the DAB station.
Note:
• The programme name may be the same depending
on DAB programmes.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when you
want to search for a desired programme.
1. Press FNC button 3 to receive a DAB station.
2. Perform the following operation depending on
the connected model.
Press SCN button 4 . “SCAN” lights up and
the unit starts scanning each programme for
10 seconds sequentially. Each time the main
unit scans, the programme name is shown in
the display.
3. To stop programme scan when a desired
programme is tuned in.
Press SCN button 4 .
Digital Radio / DAB Operations
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes
(6 programmes each) can be preset in the pre-
set buttons.
[M1], [M2] and [M3]
1. Press FNC button 3 to select DAB mode.
2. Press BND button ! to select any one shown
above.
3. Press the right or left SEARCH button % to
select a desired programme.
4. Press and hold one of Preset buttons (1 to 6) 8
for 2 seconds or longer to store the programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
Recalling a preset programme
1. Press FNC button 3 to select DAB mode.
2. Press BND button ! . Each time you press
BND button ! , the display changes in the fol-
lowing order:
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
3. Press one of Preset buttons 8 to recall a
preset programme.
Note:
• Press and hold Preset button
8 for 2 seconds or
longer to store the programme currently being re-
ceived. (Manual memory)
AF function
The AF function switches to a different frequency
on the same network in order to maintain opti-
mum reception.
∗
The factory default setting is “ON”
∗
If the reception of the current broadcast station
deteriorates, “SEARCHING FOR SAME STATION”
or “SEARCH” appears in the display and the radio
searches for the same programme on another fre-
quency.
∗
For details on “AF function”, refer to the section
“RDS operation” of each owner’s manual.
● Switching OFF the AF function
● Switching ON the AF function
● AF function between RDS and DAB
When the same programme is broadcast by both
RDS and DAB, and this function is ON, the main
unit switches to receiving the broadcast with the
better reception automatically.