Clarion XAZ611 - Manual (Page 3)

280-7626-00
XAZ611
4
XAZ611
3 8
XAZ611
English
2. PRECAUTIONS
This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio com-
munications. However, there is no guarantee
that interference will not occur in a particular
installation.
If this equipment does cause harmful interfer-
ence to radio or television reception, which can
be determined by turning the equipment off and
on, the user is encouraged to consult the dealer
or an experienced radio/TV technician for help.
Flip Down Panel
This unit uses a flip-down structure that makes possible large-size displays.
CAUTION
When opening and closing the FLIP DOWN
PANEL, be careful not to catch your fingers.
They could be injured.
1. Always use this unit with the FLIP DOWN
PANEL closed.
2. Do not force operations or use this device ab-
normally when opening or closing the FLIP
DOWN PANEL.
3. Do not use the FLIP DOWN PANEL as a tray
to place objects on when it is open.
4. When closing the FLIP DOWN PANEL, do not
press the OPEN button 1 .
5. Strong impacts to the operating or display
section can cause damage or deformation.
6. If the FLIP DOWN PANEL does not open fully,
gently open it with your hand.
Be sure to unfold and read the next page.
Veuillez déplier et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente.
Inserting the Batteries
1. Turn the remote control unit over, then slide
the rear cover in the direction of the arrow.
2. Insert the AA (UM-3/1.5V) batteries that
came with the remote control unit facing in
the directions shown in the figure, then close
the rear cover.
Notes:
Using batteries improperly can cause them to ex-
plode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or water.
• Dispose of spent batteries properly.
6. REMOTE CONTROL
Remote control unit
Rear side
AA (UM-3/1.5V)
Batteries
Rear cover
1. FEATURES
■ Rotary Encoder Volume Control
■ Touch-n-Go Flip Down Detachable Aluminum Face
■ Controller for Optional DSP / EQ, TV Tuner and DVD Deck Modules
■ Capability to Read CD TEXT Data from Clarion Compatible CD Changer
■ BEAT EQ with 3 Adjustment Modes
■ CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling
■ ® FM Reception System
■ Full Logic Tape Transport with True Function / Auto Reverse with Dual Azimuth Adjust
■ Dolby ® B Noise Reduction
■ 4-Channel Line Level Output with Fader Control
■ 180W (45W
×
4) Maximum Power Output
Handling Cassette Tapes
• Avoid using cassettes of 120 minutes or longer.
(Such cassettes have extremely thin tape, so
the tape can become stretched or cut.)
• Periodically play a cleaning cassette in the
player to clean the head.
• Keep magnet items like magnets, and iron and
steel items like screwdrivers away from both
cassette tapes and the tape head in the player.
• Do not oil the cassette mechanism.
• Do not use any cassette tapes with peeling
labels or deformed cases. Such cassette tapes
can cause breakdowns.
• When not using the player, always take the
cassette out of the mechanism. Exposing a
cassette to direct sunlight, extreme tempera-
tures or high humidity can damage the cas-
sette.
Using any of the following types of cassette
tapes can cause malfunctions.
• Cassette tapes with low recording levels
• Cassette tapes in which the unrecorded sec-
tion between tracks is shorter than 4 seconds
• Cassette tapes with noise or the like recorded
between tracks
• Cassette tapes on which there are long unre-
corded sections in the middle of a track
Handling precautions
• Slack in the tape can cause malfunctions. In
particular for prerecorded cassette tapes and
90-minute tapes, take up any slack in the tape
before inserting it into the cassette player.
This unit uses a precision mechanism. Even in the event that trouble arises, never open the case,
disassemble the unit, or lubricate the rotating parts.
CAUTION
CHANGES OR MODIFICATIONS NOT EX-
PRESSLY APPROVED BY THE MANUFAC-
TURER FOR COMPLIANCE COULD VOID
THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
INFORMATION FOR USERS: .
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANU-
FACTURER WILL VOID THE WARRANTY AND
WILL VIOLATE FCC APPROVAL.
Receiver for remote control unit
Operating range: 30° in all directions
Signal transmitter
English
English