Error codes, Error codes -16 – Canon L90 User Manual
Page 179
Troubleshooting
8-16
Error Codes
An error code is a four-digit code shown on an ERROR TX REPORT or an ERROR RX
REPORT when an error occurs.
For details on reports, see Chapter 9, “Appendix,” in the Reference Guide.
See the table below for individual error codes.
Error Code
Description
Action
0001
The sender may not be using a G3 fax
machine.
Make sure the sender’s machine is
compatible with your machine.
0070
Reception was manually canceled on
the machine.
Ask the sender to resend the
document if necessary.
0071
The machine’s memory is full.
Print, send, or delete any documents
stored in memory.
0080
The recipient’s machine did not
respond within 35 seconds.
Resend the document. Ask the other
party to check their machine. If you
are making an overseas call, add a
pause to the number.