Sears 134411800 User Manual
Immuctions, Msermm
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Meter Case Installation Hardware
immucTioNS
to
change
the
number
of
coin
slide
msERmm
to
start
appliance
.
1.
Disconnect power from machine,
2.
Turn Shaft & Cam Assembly in a clockwise direction until switch lever arm drops into cam notch
(Fig. 2),
3.
Lift Adjusting Tab away from cam with finger and turn Tab to desired number. Make sure Tab\
locks into place in new position,
4.
Turn Shaft & Cam Assembly in a clockwise direction until switch lever arm is on top of Tab to
assure that both mechanism switches are open (Fig, 3)
5.
Reconnect power to machine.
P/N 134411800(0403)
Advertising