Parts identification – Sears 917.249491 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PARTS IDENTIFICATION
NOTE: When right hand {R,H.) and ieft hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor,
m the operator's position.
(1) 3/8" Wrench
(1) Drive Ratchet
THESE ARE THE TOOLS YOU WILL NEED TO
(1) 1/2" Wrench
(1) 3" or longer Extension
ASSEMBLE YOUR GRASS CATCHER:
(2) 9/16" Wrenches
(1) Short Handle
(1) 1/2" Socket
(1) 9/16" Deep well Socket
Phillips Screwdriver
A
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift/motion control lever in "NEUTRAL" position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key.
Make sure the blade and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come in
contact with plug.