Sears 200.71488 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

110V AC ELECTRICAL DEVICE EXAMPLE RUN-TIME CHART

Appliance Type

Spotlights, Sump Pumps, DVD Players

Faxes, TVs, Small Power Tools

Computer Printer, Medium Power

Tools, Blenders

The maximum continuous load is 400 watts.

*NOTE: Estimated run-times. Actual time may vary. Times are based on the internal

battery being fully charged.

Estimated Wattage

100 Watts

150 Watts

200 Watts

Estimated Time*

1.5 Hours

1.25 Hours

55 Minutes

DIGITAL DISPLAY FUNCTIONS

1. Portable Power 1150 - To check the

internal battery’s status, press the

display switch on the front of the 1150.
The display will show the charge

percentage of the internal battery.

2. Vehicle - For the first 5 seconds, the

display shows the vehicle’s battery

power level in a percentage.

3.

Vehicle and Portable Power 1150 -

After 5 seconds, the display blinks

and switches to show the combined

total starting power of the vehicle and

1150 batteries.

You have 10 seconds to attempt to start
your vehicle from the time you turn your

key. You can crank as many times as
necessary during these 10 seconds. After

that time, the clamps will shut off and there
will be no power available for one minute.

The display will first show a 10-second
countdown, then a 60-second countdown.
This cycle will repeat itself until there is no

power left in the Portable Power battery.
See Page 4 for further starting details.

4.

AC Power - When using the 1150

inverter, the display shows the 1150's
battery percentage of charge. When

the 1150 is clamped to an external

battery and the inverter is on, the dis­
play blinks and shows the combined
power level of the 1150 battery and

the external battery.

CHARGING INTERNAL BATTERY

This Portable Power 1150 comes with a
sealed, non-spillable maintenance-free

lead-acid battery. This internal battery is

specifically designed to deliver high power

jump-starting as well as repetitive deep

cycling performance.

To charge the Portable Power 1150 inter­

nal battery:

1.

Check the internal battery’s charge

level by pressing the switch marked

DISPLAY. The Digital Display will

show the battery’s percentage of
charge.

NOTE: Internal battery’s status Dis­

play is most accurate when the Por­

table Power 1150 has been discon­

nected from all devices and charging

sources for at least 30 minutes.

2.

Using a proper extension cord, con­

nect the cord to the charge plug and

then plug the cord into a properly wired
and live 110Vac/60Hz wall outlet.

CAUTION: Operating the Portable

Power 1150 while the internal battery

is being charged may cause perma­
nent damage to the 1150.

3.

While the Portable Power 1150 is

charging, the battery’s percentage
of charge will be displayed. When the

internal battery is fully charged the

display will show 100. The Portable

Power 1150 is then ready to use or

store. Complete charging may take

up to 72 hours. If there is an error

while charging, CHS

E r r

will be dis­

played.

Advertising