Acer V196HQL - Manual

CD IVIOfVIIT
VISBHPL
Quick Guide
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20** to 60** C (-4** to140** F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
•
Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
SPECIFICATION
Package contents
LCD
monitor
Power cord
VGA cable
(optional)
Quick start
guide
Attaching the monitor to the base
1 Remove the monitor base from the packaging and place it on a stable and level workspace.
2 Remove the monitor from the packaging.
3 Align the release button at the buttom of the monitor with the corresponding slot at the bottom of
the base. A clicking sound signifies that the monitor has been securely attached to the base.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power
cord.
2. Connect the signal cable to the VGA
input socket of the monitor, and the VGA
output socket of the graphics card on the computer. Then
tighten the thumbscrews on the signal cable connector.
3. Insert the monitor power cable into the power port at the
back of the monitor.
4. Plug the power cords of your computer and your monitor [jj
into a nearby electrical outlet.
External controls
1&2 d) Power button Turns the monitor on/off. Blue indicates power on. Amber indicates
standby/ power saving mode.
3&4 </> Minus/Plus If the OSD is active, press the Minus or Plus buttons to toggle between
the OSD options. If the OSD is inactive, press the Minus or Plus buttons to
adjust the volume. (Optional)
5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.
6 Auto Auto If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive,
press Auto and the monitor will automatically optimize the display
position, focus, and clock of your display.
7 e
Empowering
Key a. When the OSD menu is active, this button will act as the exit key (exit
OSD menu).
b. When the OSD menu is inactive, press this button to select scenario
mode.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Flowever, there is no guarantee that interference
will not occur in a particular installation. If this device does cause harmful interference to radio
or television reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements
and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and
RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for
the setting of ecodesign requirements for energy-related product.
Notice: Shieided cabies
All connections to other computing devices must be made using shielded cables to maintain
compliance with EMC regulations.
Notice: Peripherai devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B
limits may be attached to this equipment. Operation with non-certified peripherals is likely to result
in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user
authority, which is granted by the Federal Communications Commission, to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
Disposai of waste equipment by user in private househoid in the European Union
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more
information ab ut where you can drop off your waste equipment for recycling,
please contact your local city office, your household waste disposal service or the
shop where you purchased the product.
LCD Panel
Driving system TFT Color LCD
Size 18.5"W(47cm)
Pixel pitch 0.3mm(H) x 0.3mm(V)
Brightness 250cd/m^(Typical)
Contrast 100,000,000:1 Max. (ACM)
Viewable angle 170“ (H)160“(V)(CR=10)
Response time Sms (on/off)
Panel Type TN
Video R, G, B Analog Interface
H-Frequency 30KHZ - BOKHz
V-Frequency 55-75HZ
Display Colors 16.7M Colors
Dot Clock 140MHz
Max. Resolution 1366x768®60Hz
Plug & Play VESA DDCCI/DDC2B
Power consumption
@200cd/m^
ON Mode 11.5W(typ.)
Sleep Mode 0.45W(typ.)
Off Mode 0.35W(typ.)
Input Connector D-Sub
Input Video Signal
Analog:0.7Vp-p(standard), 75 OHM, Positive
Maximum Screen Size
Horizontal:410mm
Vertical:230mm
Power Source 100-240V-, 50/60HZ
Environmental
Considerations
Operating Temp: S'* to BS^C
Storage Temp: -20“ to 60“C
Operating Humidity: 10% to B5%
Dimensions 441 (W) X 353(H) X 191 (D)mm
Weight (N. W.) 2.72kg Unit (net)
Mechanism spec
Tilt:-5“ to +25“
Swivel: No
Height adjustment; No
Pivot: No
Detachable foot stand: Yes (by Release button)
External
Controls;
Switch / Buttons
Power Button Auto/ Exit
Left(<) /Right(>) E(Empowering) Key
MENU/ENTER
Functions
Contrast RGB Color temperature
Brightness Language
ACM On\Off OSD position, timeout
Focus Auto configuration (only Analog input model)
Clock Input signal Selection (only Dual input model)
H. Position DDCCI On/Off
V. Position Display information
(Warm) Color Reset
(Cool) Color Exit
* All specifications are subject to change without notice.
Regulatory Compliance
C € © O F g ® ( ® ) ® ®
. ^ ^ N314 ME61 UA.TR002
R33037
X f t N O M
1MM41
Find manuals and other documents for your Acer
product on the official Acer support website.
Illlllllllllllllllllllllllllllllllllllllllllll ^ ^
MU.LXN00.001 Q41G19M178674A