To remove and replace stitch pattern plate cover, To remove, To replace – SINGER 401A User Manual
Page 103
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TO REMOVE AND REPLACE
STITCH PATTERN PLATE COVER
85
I
TO REMOVE
Place several sheets of paper under the two
springs as illustrated. Turn cover all the way
back until it snaps off. The paper will prevent
damage to machine arm during cover removal.
TO REPLACE
Position cover with lugs resting on top of
springs. Push cover in the direction shown until
it snaps into place.
Advertising