SINGER 2001 TouchTronic - Manual (Page 35)

stitch adjustments
USING STITCH LENGTH WITH
STRAIGHT STITCH
To increase or decrease stitch length for a
straight stitch, follow the procedure below on
two layers of scrap fabric.
I
Touch
i
straight stitch.
This must aiways be done first.
Touch ------- four dashes in the center of
your stitch selection panel to turn on Digital
Fine Tuning.
If a shorter stitch length is desired,
touch ^ . Digits will appear in red, begin­
ning with digit 5, and will continue to decrease
to minimum stitch length 0. The appearance
of each digit will be accompanied by a beep.
If a longer stitch length is desired,
touch 4 . Digits will appear in red, begin­
ning with digit 5, and will continue to increase
to maximum stitch length 9. The appearance
of each digit will be accompanied by a beep.
When the stitch length or desired digit is ob­
tained, remove finger from appropriate arrow.
Beeping sound will continue when finger is
left on digits 0 and 9.
If you wish to return to a particular stitch
length, make a note of the digit displayed.
USING STITCH LENGTH WITH OTHER
STITCH PATTERNS
To modify other stitch patterns using stitch
length, sew with the length on various digits
until you get the stitch pattern fine tuned to
the appropriate length to suit application,
fabric, or desired effect.
Note: Because the Fiexi-Stitch patterns are
programmed at the best possible stitch length
to suit your applications, it will not be necess­
ary to alter length with the Fiexi-Stitch pat­
terns on your machine. Fiexi-Stitch patterns
are illustrated on page 28.
S i / .
4''
I
I
I
I
.\I a
LENGTH
I
LENGTH
LENGTH
29