Belkin F4D051-4 User Manual
Instructions, Tools needed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTRUCTION SHEET- F4D051-4
HINGED WALL-MOUNT BRACKET 4U
INSTRUCTIONS
1. Mark locations for two screws on your wall. They must be
16 inches apart horizontally, and level. Standard stud spacing
in the wall is 16 inches (C).
2. Attach bracket to wall using the proper screws (A) (not
provided).
3. Attach panel (B) to bracket with screws provided (2).
NOTE:
-The mounting holes on the bracket are spaced 16
inches apart to allow attachment to the wall studs.
-For best results, locate the wall studs and screw directly
into them.
-If there are no studs available, make sure to use a
high-strength anchor in wallboard.
-Never screw into wallboard without the proper anchor.
-Because of the many different types of walls, mounting
screws are not included.
-For masonry walls, use a lag anchor and screw (at least
#10).
-For drywall with studs, use a wood screw two inches in
length t least #10).
-For drywall without stud mounting, use an auger anchor
and screw (at least #10).
B E L K I N
TOOLS NEEDED:
#2 Phillips screwdriver
Level
PARTS LIST
ITEM QTY
DESCRIPTION
1
1
Wall-Mount Bracket
2
4
Pan Head Phillips 10-32 x 0.5