Cisco Cisco Unified Communications Server 2000.4.3a - Manual (Page 28)

28
Installing the Operating System on the Cisco Unified Communications Server, Versions 2000.4.3 and 2000.4.3a
OL-10221-02
Ongoing Server Management
• Verify that all necessary services in Cisco Unified CallManager Serviceability are running on the
server. Refer to the Cisco CallManager Serviceability Administration Guide (for 3.3) or
Cisco Unified CallManager Serviceability Administration Guide (for 4.1 and 4.2).
Ongoing Server Management
The HP Insight Management Agent or the IBM Director Agent, both SNMP agent extensions, allow you
to monitor and manage the specific components of your server, such as CPU, virtual memory, and disk
usage. They also monitor server temperature, fan status, power supplies, and NIC information. On
Cisco Media Convergence Servers and Cisco-approved, customer-provided servers, the drivers upgrade
when you upgrade the operating system.
Error Messages
Table 6 describes error messages that display in dialog boxes and the appropriate corrective actions. If
you need to obtain the log files, see the “What if I encounter problems during the installation?” section
on page 16 .
Table 6 Error Messages
Error Message Corrective Action
Any existing configuration and information on the
hard drives will be lost. DO YOU WISH TO
PROCEED? ALL DATA WILL BE LOST. To continue the installation, click OK.
Configuring the Hard Drives. System will reboot
upon completion... The system automatically configures the hard
drives. You do not need to take any action.
Configuring System BIOS. The system automatically configures the BIOS.
You do not need to take any action.
Configuring System BIOS. System will reboot
upon completion... The system automatically configures the BIOS.
You do not need to take any action.
Clearing the RAID Array Configuration...
Clear RAID Configuration
The system automatically clears the RAID
configuration. You do not need to take any action.
The SATA RAID BIOS Setting will be enabled on
this system and a reboot is required. The System
will now reboot.
REBOOT REQUIRED
The system reboots automatically; you do not
need to take any action.
Transferring Image on to System. This will take
several minutes... You do not need to take any action.
Image transfer is initiating... You do not need to take any action.
Elapsed time for Image Transfer is <number>
minutes. The transfer time depends on the server type,
interface speed, and other factors. You do not need
to take any action.
Adding latest Security and System Updates. You do not need to take any action.
The installation program has determined that this
server is not supported by this media. This message displays when the server is not
associated with the DVD media.