Chauvet Obey 40 - Manual (Page 15)

Obey™ 40 User Manual Rev. 7 Page 15 of 160
Control Descriptions
Button or Fader Description
<Fade Time>
Fader that adjusts the playback fade time—the time of the change between each step of the chase.
Playback speed times range from 0 seconds to 30 seconds. The LCD display shows fade times in
seconds while the fader is moving, but returns to showing the current chase, scene and bank after
the fader is moved.
The display shows time for the fader as follows:
· XX.XX - with the dot at the bottom, shows seconds and 10ths of seconds.
Fader is also used to adjust, select, and set options in Program mode.
<Program> Button that toggles the board in and out of Program mode.
<Midi/Add>
Button that adds scenes and steps to chases in Program mode, and allows selection of a MIDI
channel in MIDI mode.
<Auto/Del>
Button that selects auto playback mode, in which playback timing is controlled by the
<Speed Time> and <Fade Time> faders. Button is used to delete chases and scenes in Program
mode.
<Music/Bank Copy>
Button that selects the music trigger, in which playback timing is controlled by music. Button also
copies an entire bank of scenes in Program mode.
<Tap Sync/Display>
Button that sets the tap sync trigger in which playback is controlled by button tapping. Button is also
used for various functions in program.
<Blackout>
Toggle button that stops all DMX transmission. Makes the lights go black. Stops the strobe and the
fog. When blackout is on the LCD display shows an indicator.