Technical information, Maintenance, Technical specifications – Chauvet Obey 40 User Manual

Page 34: Echnical, Nformation

Advertising
background image

Page 34 of 160

Obey™ 40 User Manual Rev. 7


6.

T

ECHNICAL

I

NFORMATION

Maintenance

To maintain optimum performance and minimize wear, fixtures should be cleaned
frequently. Usage and environment are contributing factors in determining frequency. As a
general rule, fixtures should be cleaned at least twice a month. Dust build-up reduces light
output performance and can cause overheating. This can lead to reduced lamp life and
increased mechanical wear. Be sure to power off fixture before conducting maintenance.
1. Unplug product from power.
2. Use a vacuum or air compressor and a soft brush to remove dust collected on external

vents.

3. Clean all lenses when the fixture is at room temperature with a mild solution of glass

cleaner or isopropyl alcohol and a soft lint-free cotton cloth or lens tissue.

4. Apply solution to the cloth or tissue and drag dirt and grime to the outside of the lens.
5. Gently polish optical surfaces until they are free of haze and lint.

Always dry the parts carefully after cleaning them.

Technical

Specifications

WEIGHT & DIMENSIONS
Length

19 in (483 mm)

Width

3.5 in (89 mm)

Height

6.7 in (171 mm)

Weight

5.7 lb (2.6 kg)

Power
Auto-ranging external power supply

100–240 VAC, 50/60 Hz

Power consumption @ 120 V

<1 W (500 mA) max, 0.2 A inrush

Power consumption @ 230 V

<1 W (500 mA) max, 0.2 A inrush

INDOOR/OUTDOOR
Rating

For indoor use only

Thermal
Maximum ambient temperature

104 °F (40 °C)

Control & Programming
Data output

3-pin XLR

Data pin configuration

pin 1 ground, pin 2 (-), pin 3 (+)

Total DMX control channels

192

Ordering Information
Obey™ 40

OBEY40

WARRANTY INFORMATION
Warranty

2-year limited warranty

Advertising