Sekonic L-358 - Manual (Page 10)

-6-
8. Mesurement Lock and Measurement Lock Off
1. Hold down the Mode set button !0 and ISO1 button !1
and "LOC" will appear to indicate that the settings are
locked. The last measurement is held until the lock is
released, even if the Jog wheel t is accidentally
moved.
However,if the measurement button !5 is pressed,a
new measurement is displayed with the same locked
settings.
2. To release the Measurement lock, perform the same
operation for the Measurement lock, Hold down the
Mode set and ISO1 button and "Off" will appear to in-
dicate that the Measurement lock is released.
Reference:
If the power supply is OFF or Auto OFF when in the locked position, the dial lock function will
continue operating when the power supply is turned on again.
3. Before Using
ISO 1
MODE
ISO 1
MODE