Converting a sound, Selecting sound, Converting stereo to mono – Akai MPC 2000xl User Manual
Page 106
Chapter 6: Creating and Editing Sounds
Page 95
Converting a Sound
You can convert a stereo sound into 2 mono sounds, as well as converting 2 mono sounds into
one stereo sound.
Note: Since the sound conversion is to create a new sound file, please check that there is
sufficient memory available before the conversion.
Selecting Sound
While the cursor is on the Snd: field in the TRIM mode, press
OPEN WINDOW
.
........................
......................................................................................................
..........................................................................................................
.....................................................................................................
............................
CLOSE
COPY
CONVRT
DELETE
Sound
Sound name:
Sound name:
P-SN_RIM
<Sound spec.>
<Sound spec.>
Rate: 44100Hz
Rate: 44100Hz
Type:STEREO
Size: 64kbytes
Size: 64kbytes
Sound name:
You can choose a new name for the sound here (if you do not want to change the name, press
CONVRT
[F3]). Tap a drum pad or rotate the DATA wheel to display the name window.
Press
ENTER
[F5] to save the new name, then press
CONVRT
[F3].
Converting Stereo to Mono
When a stereo file is selected, the following window will appear.
Press
NEXT
[F5].
........................................................................................
....................................................................................
............................
........................
CANCEL
Stereo source:
Stereo source:
P-SN_RIM
New L name:P-SN_RIM______-L
New L name:P-SN_RIM______-L
New R name:P-SN_RIM______-R
New R name:P-SN_RIM______-R
....................................................................................
STEREO TO MONO
STEREO TO MONO
DO IT
Give the new mono sounds names at New L name: and New R name: fields. The default
names will be the original name with L and R suffixes added.
Commence the conversion by pressing DO IT[
F5
].
........................................................................................ ............................
........................
CANCEL
Convert:
STEREO TO MONO
....................................................................................
Convert Sound
NEXT