Akai MPC 2000xl - Manual (Page 20)

Page 9
Chapter 1: Introduction
CD-ROM care
Dust, dirt, scratches or warps on the CD-ROM may lead to faulty CD-ROM data loading. In order
to take full advantage of the CD-ROM player’s performance capabilities, follow the precautions
outlined on this page.
Disc handling
Hold the CD-ROM by the outer edge only, supporting it at the center with your index finger if
necessary.
Avoid touching the unprinted side of the disc.
Do not glue any labels or stickers etc., on the disc.
Disc storage
Do not store the CD-ROM in a location which is subject to direct sunlight, high humidity, or hot air
from heating appliances.
Always return the CD-ROM to their plastic cases for storage.
Disc cleaning
It is recommended that you periodically wipe the recorded side of your CD-ROM with a
commercially available silicone cloth (such as that used for cleaning camera lenses or glasses) in
order to remove dust, dirt or fingerprints. Wipe the disc gently, being careful not to scratch its
surface.
When wiping the disc, refer to the illustrations below. Unlike records, CD-ROM should always be
wiped in a straight line from the center to the edge.
Do not use volatile chemical substances such as denatured alcohol, cleaning fluid intended for
analog records, or antistatic fluids, as these may damage the CD-ROM.