Settings for midi output – Akai MPC 2000xl User Manual

Page 64

Advertising
background image

Page 53

Chapter 3: Recording Sequences

Settings for MIDI output

To display the MIDI output window, from the Main Screen, select the field shown below.

Then press OPEN WINDOW.

Soft thru:

To set the MIDI channel that MIDI data received at MIDI IN is to be sent out through MIDI OUT.

OFF

MIDI through is turned off.

AS TRACK

In single track recording mode, the MIDI OUT channel will be set according to the setting
of each track.
In multiple track recording mode, the MIDI OUT signal will be sent out as specified in the

Multi Recording Setup

window.

OMNI-A

MIDI data received at MIDI IN will be sent out through MIDI OUT A.
During track playback, this data will be merged with the track data.

OMNI-B

MIDI data received at MIDI IN will be sent out through MIDI OUT B.

OMNI-AB

MIDI data received at MIDI IN will be sent out through MIDI OUT A and B.

Device name:

You can name a MIDI device name here after selecting the MIDI channel (01A - 16B). This
setting is common to all sequences.

Panic

This will stop all external MIDI devices from playing (All note off and Reset all controller
messages are sent).

Pressing

MONITR

[F2] displays the MIDI output monitor, where you can monitor which MIDI

channels are being sent (the black squares above the MIDI channel numbers will flash).

.......................................................

..................................................................................................

Sq:

01-(Sequence01)

TrMUTE

SOLO

Tr +

Now:001.01.00

STEP

EDIT

Tr -

™:120.0(MAS)

Timing:1/16

Tsig: 4/ 4

Tsig: 4/ 4

Count:OFF

Loop: ON

Loop: ON

Bars: 0

Bars: 0

Tr:01-Track-01

ON:YES

Pgm:OFF

S:MIDI :

S:MIDI :

10A

-Device10

Velo%:100

........................

......................................................................................................

....................................................................................................................................

CLOSE

PANIC

MONITR

MIDI Output

MIDI Output

Soft thru:AS TRACK

Soft thru:AS TRACK

Device name:10A-Device10

Device name:10A-Device10

....................................................................................

........................

......................................................................................................

........................................................................................................

CLOSE

MIDI Output Monitor

MIDI Output Monitor

....................................................................................

OUT A

OUT B

Advertising