Sequence preferences, Transposing a track – Akai MPC 2000xl User Manual
Page 85
Chapter 4: Editing Sequences
Page 74
.......................................................
..................................................................................................
Sq:
01-Sequence01
TrMUTE
SOLO
#
¶
Tr +
Now:001.01.00
STEP
EDIT
Tr -
™:120.0(SEQ)
Timing:1/16
Tsig: 4/ 4
Tsig: 4/ 4
Count:OFF
Loop: ON
Loop: ON
Bars: 2
Bars: 2
Tr:01-Track-01
ON:YES
Pgm:OFF
S:
DRUM4
:OFF NewPgm-A
:OFF NewPgm-A
Velo%:100
Sequence Preferences
This sets the preferences of the main screen for when you create new sequences.
From the main screen, press
EDIT
[F2] to display the Event Copy screen, then press
USER
[F5].
..............................................................
..................................................................................................
Main screen user defaults
Main screen user defaults
USER
STEP
EDIT
™:120.0(SEQ)
Tsig: 4/ 4
Tsig: 4/ 4
Loop: ON
Loop: ON
Bars: 2
Bars: 2
Pgm:OFF
S:MIDI :10A-Device10
S:MIDI :10A-Device10
Velo%:100
TrMUTE
Select the field with the CURSOR keys and set the parameter with the DATA wheel. Only the
fields shown here can be set as preferences.
For details regarding parameters, refer to the “Main Screen” section.
Transposing a Track
Here you can transpose the pitch of a track.
Hold down SHIFT and press MISC. (numeric key 2), then press
TRANS
[F2].
....................................................................................
Tr:01-(Unused)
<Tr:00=ALL>
Transpose amount: 0
Transpose amount: 0
<except drum tr>
<except drum tr>
Pressing FIX will change the note data
Pressing FIX will change the note data
permanently!!
Bar:001 - 001
Bar:001 - 001
FIX
PUNCH
TRANS
2ndSEQ
•
Tr:
This selects the track that you want to transpose. When this is set to 00, all the tracks will be
transposed. However, drum tracks will not be affected by the transposition.
•
Transpose amount:
This sets the amount of transposition. You can set up to plus/minus twelve for each half
tone. Plus twelve is one octave up and minus twelve is one octave down. The settings here
do not directly change the data but only transpose the data when they are played back.
•
Bar:
Set the range of bars that are to be transposed here (left hand figures = from bar / right hand
figures = to bar).
Press MAIN SCREEN to return to the Main Screen.
#¶
will be displayed to the left of the
Now:
field when a track has been transposed.
Note:
#¶
will not be displayed when data is transposed with the FIX [F6] key.