Akai MPC 2000xl - Manual (Page 90)

Chapter 5: Song Mode
Page 79
Select the next sequence (assigned to Step 2), with the DATA wheel.
.......................................................
.....................................................................
................ ................ ................
Song:01-Song01 Now:003.01.00
INSERT CONVRT DELETE
TEMPO:MAS
™:120.0
LOOP:OFF
Step Sequence Reps
1 01-Sequence01 1
2 02-Sequence02 1
(end of song) (end of song)
In the same way as above, assign sequences and increase the number of steps.
Renaming a Song
To open the Song window, select the Song: field and press OPEN WINDOW.
........................
......................................................................................................
......................................................................................................... ............................ CLOSE COPY DELETE
SONG
Song name: S ong01
Default name :song Default name :song
.................................................................................................
• Song name:
Changes the name of the song.
Tap a drum pad or rotate the DATA wheel to display the name window.
Press ENTER after you have entered the name.
Note: If you do not press the ENTER key and move the Default Name: field or
other pages with the CURSOR DOWN key, the entered name will be ignored and
the name will not change.
• Default name:
This sets the name that will automatically be used when data is entered into a new song
(titled “Unused”). Enter the name in the same way as for the Song name.