Motorola sb6120 - Manual (Page 30)

2 INSTALLATION
22
When you complete the TCP/IP configuration, go to Verifying the IP Address in Windows
Vista .
Verifying the IP Address in Windows 2000 or Windows XP
Do the following to check the IP address:
1. On the Windows Desktop, click Start.
2. Select Run. The Run window is displayed.
3. Type cmd and click OK to display a command prompt window.
4. Type ipconfig and press Enter to display the IP configuration information. A display
similar to the following indicates a normal configuration.
5. If, as in the following window, an Autoconfiguration IP Address is displayed, there
is an incorrect connection between the PC and the SB6120, or there are
broadband network problems.
6. After verifying the broadband connections, renew the IP address. Do the
following to renew the IP address:
7. At the command prompt, type ipconfig /renew and press Enter. If a valid IP address
is displayed as shown, Internet access should be available.