A. supplemental information, Factory settings, Appendix a supplemental information – NETGEAR N600 Wireless Dual Band Router WNDR3400v2 User Manual
Page 110: Supplemental information
110
A
A.
Supplemental Information
This appendix provides factory default settings and technical specifications for the N600
Wireless Dual Band Router WNDR3400v2.
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or some other
similar object to press and hold the Restore Factory Settings button on the back of the
router for at least 5 seconds. The router resets and returns to the factory settings.
Your
device returns to the factory configuration settings shown in the following table.
Table 4. Factory default settings
Feature
Default behavior
Router login
User login URL
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Port speed
Autosensing
Local network
(LAN)
LAN IP
192.168.1.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
Time zone
Pacific time
Time zone daylight saving time
Disabled
Allow a registrar to configure this
router
Enabled