NETGEAR wndr3700 - Manual (Page 117)

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual
USB Storage 7-5
v1.3, October 2009
You can also type \\readyshare in the address field of your Web browser.
The following table explains the fields and buttons in this screen:.
Figure 7-2
Note: If you logged in to the router before you connected your USB device, you might
not see your USB device in the router screens until you log out and then log back in
again.
Table 7-1. USB Storage Basic Settings
Fields and Buttons Description
Network Device Name The default is \\readyshare. This is the name used to access the
USB device connected to the router.
Available Network
folders Share Name If only 1 device is connected, the default share name is
USB_Storage. You can click the name shown or you can type it in
the address field of your Web Browser. If Not Shared is shown, the
default share has been deleted and no other share for the root
folder exists. Click the link to change this setting.
Read/Write
Access Shows the permissions/access controls on the network folder: All –
no password (the default) allows all users to access the network
folder. The user name (account name) for All – no password is
guest. The password for admin is the same one that you use to
log in to the router main menu. By default, it is password.
Folder Name Full path used by the network folder:
Volume Name Volume name from the storage device (either USB drive or HDD).
Total/Free
Space Shows the current utilization of the storage device.