NETGEAR wndr3700 User Manual
Page 138
RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual
Troubleshooting
8-13
v1.3, October 2009
9. Select Advanced Wireless Settings under Advanced in the main menu of the WNDR3700
router.
10. Make sure the Enable Wireless Router Radio check box is selected.
11. Click Setup Access List.
12. Make sure that the Turn Access Control On check box is not selected.
13. Configure and test your wireless computer for wireless connectivity.
Program the wireless adapter of your computer to have the same SSID and channel that you
configured in the router, and disable encryption. Check that your computer has a wireless link
and can obtain an IP address by DHCP from the router.
Once your computer has basic wireless connectivity to the router, you can configure the advanced
wireless security functions of the computer and router (for more information about security, see
Chapter 2, “Safeguarding Your Network”
Figure 8-2