Viewing a list of attached devices, Viewing a list of attached devices -10, Ethernet-connected), see – NETGEAR wndr3700 User Manual

Page 66

Advertising
background image

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

Using Network Monitoring Tools

4-10

v1.3, October 2009

The following table describes the router statistics.

To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
Set Interval.

To stop the polling entirely, click Stop.

Viewing a List of Attached Devices

The Attached Devices table lists all IP devices that the router has discovered on the local network.
From the main menu, under Maintenance, select Attached Devices to view the table.

Table 4-3. Router Statistics

Item

Description

System Up Time

The time elapsed since the router was last restarted.

Port

The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the
screen displays:

Status

The link status of the port.

TxPkts

The number of packets transmitted on this port since reset or manual clear.

RxPkts

The number of packets received on this port since reset or manual clear.

Collisions

The number of collisions on this port since reset or manual clear.

Tx B/s

The current transmission (outbound) bandwidth used on the WAN and LAN ports.

Rx B/s

The current reception (inbound) bandwidth used on the WAN and LAN ports.

Up Time

The time elapsed since this port acquired the link.

Poll Interval

The intervals at which the statistics are updated in this screen.

Figure 4-7

Advertising
This manual is related to the following products: