NETGEAR wndr3700 User Manual

Page 82

Advertising
background image

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

Customizing Your Network Settings

5-10

v1.3, October 2009

Select Static Routes under Advanced in the main menu. The Static Routes screen displays.

To add or edit a static route:

1. Click Add to open the Static Routes screen.

2. In the Route Name field, type a name for this static route. (This is for identification purposes

only.)

3. Select the Private check box if you want to limit access to the LAN only. If Private is selected,

the static route is not reported in RIP.

4. Select the Active check box to make this route effective.

5. Type the destination IP address of the final destination.

6. Type the IP subnet mask for this destination.

If the destination is a single host, type 255.255.255.255.

7. Type the gateway IP address, which must be a router on the same LAN segment as the

WNDR3700 router.

Figure 5-4

Figure 5-5

Advertising
This manual is related to the following products: