Wireless repeating function, Wireless repeating function -23 – NETGEAR wndr3700 User Manual

Page 95

Advertising
background image

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

Customizing Your Network Settings

5-23

v1.3, October 2009

Wireless Repeating Function

You can view or change wireless repeater settings for the wireless router. From the main menu of
the browser interface, under Advanced, click Wireless Repeating Function to display the
Wireless Repeating Function screen.

For each wireless radio (2.4GHz and 5GHz), the wireless router supports two modes of the
wireless repeating function, and allows you to control wireless client association:

Wireless Repeater. The wireless router sends all traffic from its local wireless or wired
computers to a remote AP. To configure this mode, you must know the MAC address of the
remote parent AP.

Wireless Base Station. The wireless router acts as the parent AP, bridging traffic to and from
the child repeater AP, as well as handling wireless and wired local computers. To configure
this mode, you must know the MAC addresses of the child repeater AP.

Disable Wireless Client Association. Usually this check box is cleared so that the router is an
access point for wireless computers.

Figure 5-11

Advertising
This manual is related to the following products: