NETGEAR Universal WiFi Internet Adapter WNCE2001 - Manual (Page 8)

8 | Chapter 1. Getting Started
Universal WiFi Internet Adapter WNCE2001
Using the Smart Wizard to Change the Setup
The Smart Wizard helps you set up your Internet adapter. For information about advanced
configuration, see
Chapter 2, Advanced Settings .
The Universal WiFi Internet Adapter (WNCE2001) Installation Guide included in the package,
explains how to install your Internet adapter. During installation, when you launch your
Internet browser, the Smart Wizard automatically displays.
After installation, to use the Smart Wizard again:
1. Connect the Internet adapter to a computer and go to http://www.mywifiext.net as
described in
Preparing to Change Your Internet Adapter Settings
on page 6.
2. From the menu on the left, select Setup Wizard. The following screen displays:
This is the same Smart Wizard that displays during installation as described in the
Installation Guide.
3. You can select a network from the list, or select the Manually input my wireless SSID radio
button. Click Continue. When you have chosen the network that you want to join, the next
wizard screen displays. Follow the onscreen prompts to connect to a wireless network:
4. When the Review Settings screen displays, click Finish. If you are done making changes,
disconnect your Internet adapter from your computer, and reconnect it to the device on
which you want to use it.