Range extender network settings, Connect the range extender to an existing network, Chapter 2 – NETGEAR Universal WiFi Range Extender WN2000RPT User Manual

Page 11: Chapter 2, range extender network, Settings

Advertising
background image

Chapter 2. Range Extender Network Settings

|

11

2

2.

Range Extender Network Settings

To change settings, connect the range extender to your computer and use your Internet browser
to go to http://www.mywifiext.net as described in

Connect a PC to the Extender with an

Ethernet Cable

on page

7.

Connect the Range Extender to an Existing Network

You can use this menu selection to wirelessly connect the range extender to your home
network.

1.

From the range extender menu at http://www.mywifiext.net, under the Setup heading,

select Connect to an Existing Network. The range extender scans for wireless

networks, and displays a list.

If your wireless network is not on the list, and it is up and running, see

Positioning Your

Range Extender

on page

6 for suggestions.

2.

Click the radio button to select your

network from the list and click Continue.

The next screen displays:

3.

Enter your network’s passphrase or key

and click Continue.

The range extender joins your wireless
network.

Advertising