Upgrade the firmware, Advanced wireless settings, Upgrade the firmware advanced wireless settings – NETGEAR Universal WiFi Range Extender WN2000RPT User Manual
Page 21: 21), and the software automatically
Chapter 2. Range Extender Network Settings
|
21
Universal WiFi Range Extender WN2000RPT
Upgrade the Firmware
Unless you changed the settings in the Firmware Upgrade screen previously, the range
extender is set up to check for new firmware automatically at log in.
If you do not want to use the automatic firmware check, clear the Check for New Version
Upon Login
check box.
To check for firmware and upgrade if it is available:
1.
From the range extender menu at http://www.mywifiext.net, under the Maintenance
heading, select Firmware Upgrade. The following screen displays:
2.
Click Check to see if new firmware is available. If it is, follow the onscreen prompts to
download it onto your computer.
3.
Use the Browse field to locate and select the new firmware.
4.
Click Upload to install the new firmware on your range extender.
CAUTION:
Once you start the firmware upgrade, do not try to go online, turn off the
range extender, shut down the computer, or do anything else to the range
extender until it finishes restarting!
Advanced Wireless Settings
The range extender is already configured with the optimum settings. Do not alter these
settings unless directed by NETGEAR support. Incorrect settings might disable the range
extender unexpectedly.