Averaging the waypoint’s location – Garmin eTrex Legend Cx User Manual

Page 23

Advertising
background image

eTrex Venture Cx and Legend Cx Owner’s Manual

13

B

ASIC

O

PERATION

>

C

REATING

AND

U

SING

W

AYPOINTS

To move a waypoint on the Map Page:

1. On the Find Menu, highlight the

Waypoints

icon, and press

Enter to open the Waypoints

Page.

2. Select the waypoint you want to move, and

press

Enter. The Waypoint Page opens.

3. Highlight the

Map button, and press Enter to

show the waypoint on the map.

4. Press

Enter again to place a MOVE marker

next to the waypoint.

5. Use the

Rocker to move the waypoint to a

new location on the map, and press

Enter.

Averaging the Waypoint’s Location

You can average a new waypoint location over time to

produce a more accurate location.

NOTE: You must have a GPS satellite fix

before you can average a waypoint’s location.

You cannot average a waypoint after it has

been saved to the waypoints list and the Mark

Waypoint page is closed as there is no longer

satellite fix for that specific location.

To calculate the average location:

1. Press the

Find key to open the Find Menu.

2. Highlight the

Waypoints icon, and press Enter

to open the Mark Waypoint Page.

3. Select the waypoint for which you want to

calculate the average location, and press

Enter.

4. Press the

Menu key to open the Options

Menu.

5. Highlight

Average Location, and press Enter

to open the Average Location Page. The unit

begins calculating the average location of the

waypoint.

Original

location

New location

Moving a waypoint

Advertising
This manual is related to the following products: